MAX Inrunner 3660 Brushless 1900 KV

MAX Inrunner 3660 1900 KV BL

The brushless motors in the MAX Runner series are suitable for use as a drive for model boats. These internal rotor motors are high-speed and suitable for use in racing boats or as a motor for sports boats and yachts.

They are fastened with two screws and are no different from conventional motors. The fastening screws must not touch the windings in the motor in order to prevent damage. The screws must not protrude more than 8 mm into the housing. The temperature of the motor must not exceed 60° C during operation. Reduce the operating voltage or the diameter/pitch of the propeller to lower the temperature. However, the maximum operating voltage must not be exceeded.

The maximum power specified in the technical data may only be reached in short-time operation (< 5 min).

Recommended controller: Seaking 60 - up to 11.1V battery voltage or for higher voltages - Seaking 120 to Seaking 180

The installation of a water cooling system is recommended

Technical data
Type MAX Runner 3660 BL motor
Voltage range 6 - 26 V
Poles 4
Internal resistance 60 mOhm
Max. Power 1200 W
Max. Current 46 A
Speed/volt 1900 rpm
Housing dimensions Ø 36 x 60 mm
Hole spacing for mounting 25 mm
Mounting thread M3
Motor shaft Ø 5 x 14.5 mm
Connection GK plug 4 mm
Weight 220 g