Products from Beier Electronic

With the switching module RC-SM-4, lights and other loads (e.g. motors, pumps, relays) can be switched directly via a channel of an RC remote control. There are 4 outputs available on the switch module, which can be loaded with a current of up to 4 A. However, the total current of all outputs must not exceed 10 A. The states of the 4...

Sound Module USM-RC-3 Probably the best and most versatile sound module on the market. The module was developed especially for RC model building, in order to equip driving models with true to original and speed-dependent sounds and in addition extensive lighting options and additional servo movements / additional functions to realize....

Volume potentiometer 100k mini for sound modules to control the volume of the module directly on the board - volume adjustment via software is also possible ! width/length: 10 x 10 mm Diameter axis: 3 mm Cable length: 20 cm

The AKL-10-W terminal block was specially developed for the USM-RC-2 sound module, the EXM-2 expansion module and the UFR series speed controllers to facilitate connection of the switching outputs. As a special feature, there are 10 slots for series resistors on the AKL-10-W terminal to facilitate the connection of LEDs. The AKL-10-W...

The small but versatile mini speed controller MFR-1230 is perfect to control smooth forward and backward movements of auxilary drives, as well as the complete drive of small models. Possible examples of motor movements are trailer supports, crane arm movements, tilt function or the movement of a tank tower can be easily controlled. The...

Sound Module USM-RC-3 Probably the best and most versatile sound module on the market. The module was developed especially for RC model building, in order to equip driving models with true to original and speed-dependent sounds and in addition extensive lighting options and additional servo movements / additional functions to realize....

The AKL-8-W connection terminal enables convenient connection of LEDs and other consumers to the switching outputs of all common Beier Electronic switching modules. The module is NOT an extension of functions but merely a way of quickly and easily connecting functions and loads to the module. Changes can be made quickly, especially in...

Data cable USB - USM3 With the data cable K-USB-2, the USM-RC-3 module can be connected directly to the PC via a USB interface. The Sound-Teacher software can receive and display live the current diagnostic data (e.g. position of the proportional channels, status of the inputs and outputs, Nautic values, etc.). This is very helpful...

A small gadget for our sound ride controllers of the SFR series and the sound module USM-RC-3. With the Bluetooth module BTC-1, the functions of the modules can be controlled via Bluetooth using the Android app "SFR-1 Controller". The range is, due to the low transmission power of smartphones and tablets, usually between 10...

Mini sound module MSM-1 Plug&Play sound module The MSM-1 is a fully pre-configured sound and light module for RC models and therefore a module that is easy to use for modellers with little experience. 14 different model types with all sound and light settings are permanently stored in the memory. The desired model can be selected using...

Output test board LED-8 The board is particularly useful in the planning and testing phase. All lighting functions, various settings, output sequences and automatic or combined lights can be tested before the actual wiring. The output test board is connected directly to the BEIER modules. The LEDs of outputs 1 and 2 light up red,...