Products from Aeronaut
Aeronaut Modellbau
Aeronaut ist ein Modellbauhersteller mit echter Tradition welcher auf schaut über 100 Jahre Firmengeschichte zurück schaut.
Spezialisiert auf Modelle aus den Bereichen AERO (Luft) und NAUT (Wasser) leitet sich auch die Firmenbezeichnung ab.
Seit Anfang der 2000er Jahre fertigt AERONAUT Baukästen bereits mit Laser Technologie und bietet ein breites Sortiment an solchen Baukästen und Zubehör für Modellbauer an.
Aeronaut Schiffsmodellbau
Fischkutter, Segeljolle oder Schlachtschiff in der AERONAUT Flotte ist für jeden Geschmack ein preiswertes Modell zu finden. Segelschiffe mit Fernsteuerung und Einsteiger Bausätze machen einen großen Teil des Sortiments aus.
No results were found for the filter!
Double block 11 mm Double block 11 mm Brass block with movable roller. The roller has a diameter of 3 mm. There is a loop for fastening at the top end of the brass blocks. Technical data Roller diameter (D) approx. 3 mm Height (H) approx. 11 mm Dimension (A) approx. 8 mm Dimension (B) approx. 5.5 mm Scope of delivery: 3 pieces
17.50€ *
Double block 14 mm Double block 14 mm Brass block with movable roller. The roller has a diameter of 5 mm. There is a loop for fastening at the top end of the brass blocks. Technical data Roller diameter (D) approx. 5 mm Height (H) approx. 14 mm Dimension (A) approx. 10 mm Dimension (B) approx. 5.5 mm Scope of delivery: 3 pieces
17.50€ *
Double block 18 mm Double block 18 mm Brass block with movable roller. The roller has a diameter of 7 mm. There is a loop for fastening at the top end of the brass blocks. Technical data Roller diameter (D) approx. 7 mm Height (H) approx. 18 mm Dimension (A) approx. 14 mm Dimension (B) approx. 5.5 mm Scope of delivery: 3 pieces
20.40€ *
Clear position lamps Clear position lamps 2 turned brass position lights for installation in a corner with a 90 degree angle Illumination is provided by warm white LEDs. Series resistors for all common on-board voltages are supplied. Technical data: Height: 10mm Diameter: 6mm
9.50€ *
Sidelights r/g Sidelights Position lights r/g One piece each of red (port) and green (starboard) sidelights made of turned brass for installation in a corner or lamp board. The lighting is provided by 3V bulbs. It is advisable to replace the bulbs with LEDs. Technical data: Height: 10mm Diameter: 6mm Voltage 3V
9.50€ *
Top Light 5.5x9mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
7.80€ *
Top Light 7.5x12mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
8.40€ *
Position Lights 7.5x12mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
8.40€ *
Top Light 10x15mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
9.30€ *
Position Lights 10x15mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
9.30€ *
Top Light 10x11mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
9.20€ *
Position Lights 10x11mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
9.20€ *
Cleat 18mm Cleat metal 18mm Cleat made of cast metal, nickel-plated. Scope of delivery: 2 pieces Technical data: 18x5.5x8 mm
3.10€ *
Cleat 13mm Cleat metal 13mm Cleat made of cast metal, nickel-plated. Scope of delivery: 2 pieces Technical data: 13x3.5x6 mm
3.10€ *
Cleat 23mm Metal cleat 23mm Cleat made of cast metal, nickel-plated. Scope of delivery 2 pieces Technical data: approx. 23x7x10 mm
3.10€ *
Top Light 10x12 Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
7.60€ *
Position Lights 10x12mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
7.60€ *
Etched Portholes 5mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
3.60€ *
Etched Portholes 8mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
3.80€ *
Etched Portholes 10mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
4.40€ *
Etched Portholes 12mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
4.80€ *
Etched Portholes 14mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
5.40€ *
Etched Portholes 16mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
5.40€ *
Etched Portholes 18mm Portholes etched from nickel silver with particularly fine detailing and extremely low overall height. Included are clear plastic discs which are manufactured over the full diameter of the porthole and are to be fitted behind the porthole. Using the disc and porthole one behind the other results in an overall height of just under...
5.50€ *
Anchor Winch/Shoring Winch Kit Kit made from laser-cut ABS parts and etched nickel silver parts. Suitable for ship models on a scale of approx. 1:32. Ropes are not included. Technical data: Scale: approx. 1.32 Dimensions approx. 82x80x40mm
33.30€ *
Viewed