Products from Aeronaut
Aeronaut Modellbau
Aeronaut ist ein Modellbauhersteller mit echter Tradition welcher auf schaut über 100 Jahre Firmengeschichte zurück schaut.
Spezialisiert auf Modelle aus den Bereichen AERO (Luft) und NAUT (Wasser) leitet sich auch die Firmenbezeichnung ab.
Seit Anfang der 2000er Jahre fertigt AERONAUT Baukästen bereits mit Laser Technologie und bietet ein breites Sortiment an solchen Baukästen und Zubehör für Modellbauer an.
Aeronaut Schiffsmodellbau
Fischkutter, Segeljolle oder Schlachtschiff in der AERONAUT Flotte ist für jeden Geschmack ein preiswertes Modell zu finden. Segelschiffe mit Fernsteuerung und Einsteiger Bausätze machen einen großen Teil des Sortiments aus.
No results were found for the filter!
Replacement LED Light Set 3-14V LED light set to replace conventional light bulbs The LED lighting set consists of 5 white LEDs and one green and one red LED. Series resistors are included for a voltage range of 3-14V and must be soldered to the LEDs. The light set enables nautical lighting for small ship models with position light (green/red) and up to 5 warm white...
6.90€ *
sailboat Clipper The sailboat Clipper is ideally suited for the beginning of model shipbuilding. The young modeler learns with this model the frame construction method and the basic knowledge of model sailing. This kit is so well prepared that no tools are required for construction, the wooden parts are all punched out and the aluminum tubes for the...
45.00€ *
Brass block 5 mm Brass block 5 mm (VE5) Brass block with movable roller. The roller has a diameter of 5 mm. There is a loop at the top end of the brass blocks for fastening. The pack contains 5 fully assembled roller blocks. Technical data Roller diameter (D) approx. 5 mm Height (H) approx. 11 mm Dimension (A) approx. 7 mm Dimension (B) approx. 3 mm
14.70€ *
Schiffslaterne Bausatz 13,5mm Schiffslaterne Bausatz mit diesem Bausatz lassen sich wahlweise Rundumleuchten, Hecklichter oder Topplichter herstellen. Geliefert werden 4 klare Lampenkörper die dann mit Fuß, Deckel oder Reflektoren ausgestattet werden können. Reflektoren, Fuß und Deckel bestehen aus Neusilber. passend für 4-mm-LED oder Glühbirnchen. Technische...
7.40€ *
Position Lights 5.5x9mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
7.80€ *
Bella Sailboat Bella is our dream boat with lots of real mahogany wood. The boat is built in the proven buckling-span construction method on a slipway plate made of Depron, which was introduced by aero-naut with the boat Classic. The construction is kept so simple that the model can be built successfully even by novice builders. By removing the roof,...
189.00€ *
Queen Mahogany Sport Boat Kit Queen mahogany sports boat kit Queen is a prototypical wooden boat from the 1960s. At that time, sports boats were still built from fine mahogany wood - like our Queen. The proven hull shape of the Classic sports boat and Diva models has been adopted in the design and further enlarged, as well as supplemented with a new superstructure....
189.95€ *
Fitting Set M 1:6 Comtesse Set of fittings made of high quality metal with noble, high gloss finish. The hardware parts are designed in 1:6 scale and as a set to fit our model yacht Comtesse. This set now also fits other mahogany yachts in the same scale. The delivery is in a nice clear box. The set consists of 1 steering wheel 1 throttle (movable) 4 cleats 2...
169.00€ *
North Sea Ffishing Boat MÖVE The Möve 2 (Seagull) was modeled after a small North Sea fishing boat, as they go fishing in large numbers on the local coasts. Due to its simple construction, the Seagull is an ideal model for beginners in model building or for the promotion of young talents in the club. The seagull is built entirely from wood. All components are...
79.00€ *
Cabin Cruiser DIVA DIVA cabin cruiser Kit of a model cabin cruiser from the 1960s. The cabin superstructure is removable, allowing easy access to the interior of the model in order to reach the components required for propulsion, such as the motor, battery and servo. The model is built using a frame construction method - a slipway (template) is supplied...
89.00€ *
Löschmonitor 70mm 1:32 Bausatz eines Löschmonitors. Die Teile sind aus hochwertigem 3D-Druck. Dem Bausatz liegt sowohl ein Strahlrohr als auch ein Schaumrohr bei, aus denen beim Bau des Löschmonitors gewählt werden kann (nicht wechselbar). Das Modell kann mit einer Pumpe funktionsfähig gemacht werden.
24.90€ *
Schiffslaterne Bausatz 8mm Schiffslaterne Bausatz mit diesem Bausatz lassen sich wahlweise Rundumleuchten, Hecklichter oder Topplichter herstellen. Geliefert werden 4 klare Lampenkörper die dann mit Fuß, Deckel oder Reflektoren ausgestattet werden können. Reflektoren, Fuß und Deckel bestehen aus Neusilber. passend für 3-mm-LED oder Glühbirnchen. Technische...
5.70€ *
Positionslampen 20mm Bausatz Positionslampen mit Board Bausatz mit diesem Bausatz lassen sich je eine linke und rechte Positionslampe bauen. Geliefert werden 2 klare Lampenkörper die dann mit einem Lampenboard ausgestattet werden können. Die Metallteile bestehen aus Neusilber. passend für 3-mm-LED oder Glühbirnchen. Technische Daten: Höhe 7mm Länge 20mm
5.50€ *
Positionslampen 25mm Bausatz Positionslampen mit Board Bausatz mit diesem Bausatz lassen sich je eine linke und rechte Positionslampe bauen. Geliefert werden 2 klare Lampenkörper die dann mit einem Lampenboard ausgestattet werden können. Die Metallteile bestehen aus Neusilber. passend für 5-mm-LED oder Glühbirnchen. Technische Daten: Höhe 9mm Länge 25mm
5.90€ *
Sailboat Lili The sailboat Lili is built on a thermoformed plastic hull with precisely cut laser parts made of wood (mahogany, birch). The kit is also aimed at beginners in the sailboat scene. However, some basic knowledge in handling different materials and tools should be present. The precision-fit parts make for easy assembly. The cockpit is...
99.00€ *
Hansa Dinghy The Hansa dinghy was introduced in 1947 by Henry Rasmussen, founder of the renowned boat and yacht yard Abeking & Rasmussen (A&R) in Lemwerder near Bremen, based on an initial design from 1920. At that time, Henry Rasmussen built a small dinghy called VISKA for two Copenhagen friends, which was used to make longer voyages single-handed...
239.00€ *
Bellissima Sailboat Bellissima is the enlargement of our sailboat Bella. The construction of the two models is identical, but the Bellissima is a larger version of this beautiful sailboat. This model is one beauty made of mahogany. The construction is made of birch and mahogany plywood on a Depron slipway plate. The plywood parts are all laser cut so...
269.00€ *
Harbor Tug Jonny Harbor tug Jonny The kit impresses with very high quality materials and rewards with a perfect result. The voluminous hull is made of GRP, all positions for hull openings are molded on. The model is delivered with 2 shaft drives and 2 rudders, a cort nozzle can be retrofitted. Propulsion is also possible with bulkhead drive, for the...
469.00€ *
Harbor Tugboat Torben Torben is a prototypical replica of a harbor tugboat and contains all the essential features of the original. Ready built, this model impresses every modeling enthusiast because of its numerous and detailed individual parts. The spacious hull offers enough space for remote control, propulsion and special functions. Fittings kit 303101...
125.00€ *
MS Greundiek Coaster MS Greundiek coaster kit The Greundiek was laid down in 1949 as "Hermann-Hans" at the Rickmers shipyard in Bremerhaven; the launch was in January 1950. The ship was one of the first ships built in Germany after World War II and one of the first ever civilian ships of all-welded construction. In 1965, the...
310.00€ *
Breton Fishing Cutter ANNA 3 Breton fishing cutter ANNA 3 kit Anna 3 is a replica of a Breton fishing cutter, which goes fishing by means of a trawl net spread on the side. The model is constructed in 1:20 scale. The large, voluminous hull is thermoformed from ABS. All wooden parts are laser-cut and manufactured in the usual aero-naut quality for a precise fit....
239.00€ *
Sport Boat PRINCESS Princess is the replica of a sports boat based on Italian models from the middle of the last century in a scale of about 1:8. These were built then as now the Princess from fine mahogany wood. The kit is constructed in wood (plywood and mahogany) in a buckling frame design which is a prerequisite for easy and quick assembly. All wooden...
189.95€ *
Fishing Cutter Jule JULE is a typical fishing cutter, as they can be found everywhere on the North Sea and Baltic Sea coast. They were built from the beginning of the 20th century until well into the 1960s. Initially made of wood, from the 1950s also in steel. The model has an elaborately designed hull, which gives the Jule a true-to-the-original sailing...
289.00€ *
Comtesse Luxury Yacht A dream of fine mahogany, combined with luxurious leather and sporty fittings. This is how you could describe our Comtesse. The sporty luxury yacht could be found like this on the lakes of high society in Geneva, Como, Garda or Lausanne. We have not skimped on exclusive features for this model. The boat is delivered in the usual...
299.00€ *
Classic Power Boat Classic is a prototypical replica of a classic power boat from the 20th century. In the hull shape, emphasis was placed on good gliding properties at fast speeds. The boat is entirely of wooden construction, made of plywood, mahogany and glued boat deck. The construction is very simple, so that even beginners can easily manage. The...
79.00€ *
Fanggut Verarbeitung Bausatz Verarbeitungsbereich für Fanggut Ein Bausatz bestehend aus einem Rüttelsieb, Sortiertisch und Kocher aus geätzten Neusilberteilen. Für Schiffe im Maßstab ca. 1:20 bis 1:25 geeignet.
45.60€ *
Brushed Motor 620 navy Special electric motor for a prototypical driving of ship models without gearbox. The motor is a power pack of size 620, 5-pole and very high torque with slow speed. Supplied with interference suppression kit. Dimensions: 36 x 75 mm Idle speed: 3.400 Shaft Ø: 3.17 mm Shaft length: 9.5 mm voltage: 6-12V max. continuous current: approx. 12A
19.80€ *
Electric Motor navy 720 Special electric motor for a prototypical driving of ship models without gearbox. The motor is based on our navy 720, a 5-pole high-torque electric motor with slow speed. Supplied with interference suppression kit. idle speed: 5.000 max. current consumption: approx.16 A shaft-Ø: 5 mm Shaft length: 14 mm rated voltage: 12 V voltage...
29.90€ *
Transportkisten 33mm offene Transportkisten mit Griffmulde Laser Bausatz aus Holz 3 Kisten ca. 33x23x7,5mm, 3 Kisten ca. 33x23x11,5 mm Maßstab ca. 1:15
5.70€ *
Transportkisten 50mm offene Transportkisten mit Griffmulde Laser Bausatz aus Holz 1 Kiste ca. 50x30x20 mm, 1 Kiste ca,. 50x30x15 mm, Maßstab ca. 1:15
5.70€ *
Viewed