No results were found for the filter!
Aqua-Race classic outboard motor Aqua-Race classic outboard motor Outboard motor in the look of the 1930-1950s for classic motorboats. Suitable for the Aeronaut Spitfire or other boats up to approx. 80cm in length. It is mounted with 4 screws on the transom of the model boat and can be adjusted in height by approx. 7mm, the angle of attack can be adjusted by approx....
59.90€ *
Direct coupling 2 to 3.2 mm Direct coupling 2 to 3.2 mm Coupling for direct connection of two shafts. Supplied complete with grub screws. Technical data: Total length 20 mm Diameter A 2 mm Diameter B 3.2 mm Outer diameter approx. 9 mm
6.95€ *
Gas Tank Ø 45 mm Medium gas tank Ø 45 mm Gas tank for steam engines Ø 45 mm fully assembled and painted. With inlet valve and adjustable outlet valve. The gas tap is mounted on the front, but can also be attached to the top of the boiler. Adapter 22313 is required for filling from a gas cartridge. Please observe the safety instructions when filling the...
119.00€ *
Gas Pipe for steam engines Gas pipe for steam engines Ready-made gas pipe with a length of approx. 25 cm. The gas pipe is used to connect the gas tank and burner. For safety reasons, we only offer the gas pipe as a prefabricated part. Individual parts of the gas pipe are not available.
13.90€ *
Exhaust steam condenser 30mm Exhaust steam condenser for steam engines Ø 30 mm The exhaust steam condenser is installed in the exhaust steam pipe of steam engines. The lubricating oil in the exhaust steam is collected in the tank so that only water vapour is discharged via the chimney. Never operate our steam engines without an exhaust vapour condenser. The...
77.00€ *
Exhaust steam condenser 40mm Exhaust steam condenser for steam engines Ø 45 mm The exhaust steam condenser is installed in the exhaust steam pipe of steam engines. The lubricating oil in the exhaust steam is collected in the tank so that only water vapour is discharged via the chimney. Never operate our steam engines without an exhaust vapour condenser. The...
79.50€ *
Exhaust steam condenser 30mm Exhaust steam condenser for steam engines, Ø 30 mm The exhaust steam condenser is installed in the exhaust steam pipe of steam engines. The lubricating oil contained in the exhaust steam is collected in the tank, so that only water vapour is discharged via the chimney. Never operate our steam engines without an exhaust steam condenser....
75.00€ *
Water Level Indicator Water level indicator Water level indicator with M5 x 0.5 thread for steam engine boilers. Complete with 45 mm glass tube and all metal fittings. Can also be used for other boilers by replacing the glass tube.
49.00€ *
Pipe Connector 3mm Steam Pipes For connecting 3 mm steam pipes with M5 x 0.5 union nuts Total length approx. 15 mm Bore approx. 2.3 mm Width across flats 6 mm Scope of delivery: 2 connectors
4.20€ *
Union Nut M5 Union nut M5x0.5 for connecting 3 mm steam pipes for 3 mm pipe and M5 x 0.5 thread in conjunction with soldering rings or cutting rings. PU = 2 pieces
4.20€ *
Solder Rings 3mm Pipe Solder rings for 3mm pipe For assembling pipework yourself. Pipes under vapour pressure must be hard soldered. PU = 2 pieces
2.70€ *
Cutting Rings 3mm Pipe Cutting rings for 3 mm pipe for 3 mm pipe for crimping with a union nut without soldering. This may only be used in pipes where there is no vapour pressure, e.g. between the machine and the exhaust steam condenser. PU = 2 pieces
2.70€ *
Steam Whistle Steam whistle with whistle tap This steam whistle with control valve, which can be operated via a pull rope or a linkage with a servo. Every whistle is of course a loss of pressure in the steam boiler and leads to a loss of power, especially with small steam boilers. The valve for the whistle can be connected to the cross dome or to a...
69.00€ *
Steam Pipe 100 mm Steam pipe 100 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
14.40€ *
Steam Pipe 150 mm Steam pipe 150 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
14.70€ *
Steam Pipe 200 mm Steam pipe 200 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
15.20€ *
Steam Pipe 250 mm Steam pipe 250 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
15.40€ *
Viewed