Ship Equipment

What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

« show less
What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories  like ship propeller, speed controller and ship shaft system . In our jojo model making shop we offer you a wide selection of ship model making... read more »
Close window
Zubehör Schiffsmodellbau

What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

40 From 43
No results were found for the filter!
Flag Germany 75x113mm (1)
Flag Germany 75x113mm (1)
Flag Germany 75x113mm (1) Flags Germany
1.60€ *
Flag Netherlands 40x60 mm (2)
Flag Netherlands 40x60 mm (2)
Flag Netherlands 40x60 mm (2) Flags Netherlands
1.60€ *
Flag Netherlands 55x83 mm (1)
Flag Netherlands 55x83 mm (1)
Flag Netherlands 55x83 mm (1) Flags Netherlands
1.60€ *
Flag Netherlands 75x113mm (1)
Flag Netherlands 75x113mm (1)
Flag Netherlands 75x113 mm (1) Flags Netherlands
1.60€ *
Flag France 17x25 mm (2)
Flag France 17x25 mm (2)
Flag France 17x25 mm (2) Flags France
1.20€ *
Flag France 27x40mm (2)
Flag France 27x40mm (2)
French flag 27x40 mm (2) French flags
1.60€ *
Flag France 37x55mm (2)
Flag France 37x55mm (2)
French flag 37x55 mm (2) French flags
1.60€ *
Flag France 50x75mm (1)
Flag France 50x75mm (1)
Flag of France 50x75mm (1) Flags of France
1.60€ *
Gas Pipe for steam engines
Gas Pipe for steam engines
Gas pipe for steam engines Ready-made gas pipe with a length of approx. 25 cm. The gas pipe is used to connect the gas tank and burner. For safety reasons, we only offer the gas pipe as a prefabricated part. Individual parts of the gas pipe are not available.
13.90€ *
Exhaust steam condenser 30mm
Exhaust steam condenser 30mm
Exhaust steam condenser for steam engines Ø 30 mm The exhaust steam condenser is installed in the exhaust steam pipe of steam engines. The lubricating oil in the exhaust steam is collected in the tank so that only water vapour is discharged via the chimney. Never operate our steam engines without an exhaust vapour condenser. The...
77.00€ *
Exhaust steam condenser 40mm
Exhaust steam condenser 40mm
Exhaust steam condenser for steam engines Ø 45 mm The exhaust steam condenser is installed in the exhaust steam pipe of steam engines. The lubricating oil in the exhaust steam is collected in the tank so that only water vapour is discharged via the chimney. Never operate our steam engines without an exhaust vapour condenser. The...
79.50€ *
England flag 20x40 mm
England flag 20x40 mm
English flag printed on one side of the fabric. Size 20 x 40 mm 2 pieces per pack
3.30€ *
England flag 47x65mm
England flag 47x65mm
English flag printed on one side of the fabric. Size 47 x 65 mm 1 piece
4.70€ *
England flag 55x117 mm
England flag 55x117 mm
English flag printed on one side of the fabric. Size 55x117 mm Quantity 1 piece
5.45€ *
USA flag 18x35 mm
USA flag 18x35 mm
USA flag 18x35 mm (2) USA flags
3.60€ *
USA flag 30x45 mm
USA flag 30x45 mm
USA flag 30x45 mm (2) USA flags
8.90€ *
USA flag 52x90 mm
USA flag 52x90 mm
USA flag 52x90mm (1) USA flag
4.70€ *
Pirate flag 20x30 mm
Pirate flag 20x30 mm
Pirate flag with skull and crossbones printed on fabric. Item no. |63499| Dimension 20 x 30 mm Packaging contents 2 pieces
6.40€ *
Netherlands flag 25x38 mm (2)
Netherlands flag 25x38 mm (2)
Netherlands flag 25x38 mm (2) Netherlands flags
1.30€ *
flag Vespucci 1:100
flag Vespucci 1:100
flag Vespucci 1:100
4.20€ *
Flagset Endeavour 1:60
Flagset Endeavour 1:60
Flagset Endeavour 1:60
11.90€ *
Exhaust steam condenser 30mm
Exhaust steam condenser 30mm
Exhaust steam condenser for steam engines, Ø 30 mm The exhaust steam condenser is installed in the exhaust steam pipe of steam engines. The lubricating oil contained in the exhaust steam is collected in the tank, so that only water vapour is discharged via the chimney. Never operate our steam engines without an exhaust steam condenser....
75.00€ *
Water Level Indicator
Water Level Indicator
Water level indicator Water level indicator with M5 x 0.5 thread for steam engine boilers. Complete with 45 mm glass tube and all metal fittings. Can also be used for other boilers by replacing the glass tube.
49.00€ *
Pipe Connector 3mm Steam Pipes
Pipe Connector 3mm Steam Pipes
For connecting 3 mm steam pipes with M5 x 0.5 union nuts Total length approx. 15 mm Bore approx. 2.3 mm Width across flats 6 mm Scope of delivery: 2 connectors
4.20€ *
Union Nut M5
Union Nut M5
Union nut M5x0.5 for connecting 3 mm steam pipes for 3 mm pipe and M5 x 0.5 thread in conjunction with soldering rings or cutting rings. PU = 2 pieces
4.20€ *
Solder Rings 3mm Pipe
Solder Rings 3mm Pipe
Solder rings for 3mm pipe For assembling pipework yourself. Pipes under vapour pressure must be hard soldered. PU = 2 pieces
2.70€ *
Cutting Rings 3mm Pipe
Cutting Rings 3mm Pipe
Cutting rings for 3 mm pipe for 3 mm pipe for crimping with a union nut without soldering. This may only be used in pipes where there is no vapour pressure, e.g. between the machine and the exhaust steam condenser. PU = 2 pieces
2.70€ *
Steam Whistle
Steam Whistle
Steam whistle with whistle tap This steam whistle with control valve, which can be operated via a pull rope or a linkage with a servo. Every whistle is of course a loss of pressure in the steam boiler and leads to a loss of power, especially with small steam boilers. The valve for the whistle can be connected to the cross dome or to a...
69.00€ *
Steam Pipe 100 mm
Steam Pipe 100 mm
Steam pipe 100 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
14.40€ *
Steam Pipe 150 mm
Steam Pipe 150 mm
Steam pipe 150 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
14.70€ *
Steam Pipe 200 mm
Steam Pipe 200 mm
Steam pipe 200 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
15.20€ *
Steam Pipe 250 mm
Steam Pipe 250 mm
Steam pipe 250 mm Steam pipe with hard-soldered connection nipples and union nut M5 x 0.5 and are assembled as pressure pipes.
15.40€ *
C-Type Schraube 5BL 55mm M5 L
C-Type Schraube 5BL 55mm M5 L
Messing Schiffsschraube für Segelschiffe mit zusätzlichem Motor und klassische kleine Dampfboote. Durchmesser: 55mm Gewinde: M5 Drehrichtung: L
24.50€ *
OTA Bluetooth Programmer
OTA Bluetooth Programmer
Hobbywing OTA Bluetooth programmer With the OTA programming module, some Hobbywing controllers can be programmed intuitively and without opening the model. The module is plugged into the controller's port for the programming card. The controller is connected wirelessly to a smartphone via the Bluetooth signal sent by the module....
36.55€ *
C-Type Schraube 5BL 55mm M4 L
C-Type Schraube 5BL 55mm M4 L
Messing Schiffsschraube für Segelschiffe mit zusätzlichem Motor und klassische kleine Dampfboote. Durchmesser: 55mm Gewinde: M4 Drechrichtung: L
39.80€ *
Flag Germany 15x23 mm (2)
Flag Germany 15x23 mm (2)
Flag Germany 15x23 mm (2) Flags Germany
1.20€ *
40 From 43
Viewed