Ship Equipment

What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

« show less
What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories  like ship propeller, speed controller and ship shaft system . In our jojo model making shop we offer you a wide selection of ship model making... read more »
Close window
Zubehör Schiffsmodellbau

What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

32 From 43
No results were found for the filter!
Ro-Power Torque 3546 650 Kv
Ro-Power Torque 3546 650 Kv
langsam laufender Brushless für große Schlepper o.ä
39.90€ *
Boost 60 490KV Brushless Motor
Boost 60 490KV Brushless Motor
Boost 60 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials. High-temperature resistant neodymium magnets and ball bearings ensure smooth running and high load capacity....
105.00€ *
Boost 50 610KV Brushless Motor
Boost 50 610KV Brushless Motor
Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials. High-temperature resistant neodymium magnets and ball bearings ensure smooth running and high load capacity....
97.00€ *
Boost 80 320KV Brushless Motor
Boost 80 320KV Brushless Motor
Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials. High-temperature resistant neodymium magnets and ball bearings ensure smooth running and high load capacity....
119.00€ *
ESC 90 Smart RC Speed Controller
ESC 90 Smart RC Speed Controller
The ISDT ESC 90 is a high quality speed controller (ESC) for use in RC models such as cars, rock crawlers and of course model boats that need to be controlled sensitively. The ESC 90 has a high current capability of up to 90(180) amps and is equipped with an advanced microprocessor for fast response time and precise control. ISDT's...
33.90€ *
ESC 70 Smart RC Speed Controller
ESC 70 Smart RC Speed Controller
The ISDT ESC 70 is a high quality speed controller (ESC) for use in RC models such as cars, rock crawlers and of course model boats that need to be controlled sensitively. The ESC 70 has a high current capability of up to 70(120) amps and is equipped with an advanced microprocessor for fast response time and precise control. ISDT's...
29.90€ *
Model Stand Flying Dutchman
Model Stand Flying Dutchman
Exclusive model stand for the Flying Dutchman ship model by Occre. The kit contains the following parts: - MDF wood - 2 brass tentacles - instructions Dimensions: Length: 300 mm width: 150 mm Height: 95 mm
45.00€ *
Disc Magnet 10x2mm
Disc Magnet 10x2mm
Extremely strong magnets diameter 10x2 mm. Disc magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 1,1kg. 10 pcs
5.95€ *
Photoetched Runabout Decorations
Photoetched Runabout Decorations
Photoetched Runabout Decorations für Riva Aquarama M 1:10
38.40€ *
Single Block 5mm (100)
Single Block 5mm (100)
Blocks 5mm (100 pieces) Single block with one hole Single blocks are used for simple deflection of lines and sheets. Technical data length 5 mm Material walnut (dark) Quantity 100 pieces per packing unit
15.20€ *
Dead Eye 5mm
Dead Eye 5mm
Dead Eye 5mm (100pcs) Dead Eye for bracing the shrouds. Technical data Diameter 5 mm Round shape colour dark Quantity 100 per packing unit
14.30€ *
Fittings Set Torben
Fittings Set Torben
Fittings set for the harbor tug Torben, consisting of all fittings such as radar, antennas, anchors, fenders, bollards, lanterns.
135.00€ *
Blocks 3mm light
Blocks 3mm light
Blocks 3mm light Single blocks 3 mm Single blocks for easy deflection of lines and sheets in boxwood (light). Technical data length 3 mm Material boxwood (light) Quantity 10 pieces
2.40€ *
Search Light Kit
Search Light Kit
Searchlight kit Kit of a modern searchlight made of etched nickel silver parts. Matching LED included in the set. The searchlight can be controlled by servos and can be turned and swivelled. Reflector approx. 18mm The headlight can be turned and swivelled. The drive can be done by mini servos. servos. Operate the LED only with series...
20.70€ *
High Power LED Headlight
High Power LED Headlight
High Power LED Headlight Ultra bright LED headlight pair with electronic switch, pre-wired. Can be connected AND switched immediately to a free channel of the remote control. An additional switch module is not necessary. Technical data: Diameter: 22mm Installation depth 21mm Power supply: 6.5-8.4V via LST-XH (S2) connector
17.90€ *
Grating 55mm
Grating 55mm
Originally, wooden gratings were used to safely cover hatches in the deck of ships, while fresh air and light could pass through. The set consists of 30 pieces of laser cut strips that can be assembled into a cover of maximum 55x55mm. Material birch wood Technical data: Length: 55mm width: 1mm Height: 3mm
2.95€ *
Cannon Portholes 8x8mm
Cannon Portholes 8x8mm
Piece ports (also gun ports) are closable openings in the side of warships through which cannons placed inside the ship, the pieces, could fire. Reproduction of a piece port for cutouts inner size 8x8mm made of metal movable. Scope of delivery 4 pieces Dimensions cutout in the hull 8x8mm Dimensions component complete 12.5mmx11.0mm
2.95€ *
Bluetooth module BTC-1
Bluetooth module BTC-1
A small gadget for our sound ride controllers of the SFR series and the sound module USM-RC-3. With the Bluetooth module BTC-1, the functions of the modules can be controlled via Bluetooth using the Android app "SFR-1 Controller". The range is, due to the low transmission power of smartphones and tablets, usually between 10...
21.95€ *
Compact Boat Shaft 400/175 M4
Compact Boat Shaft 400/175 M4
Compact boat shaft with a very good price/performance ratio. The particularly slim design should be emphasised. The motor can be mounted quickly and easily with a rigid direct coupling via the aluminium motor flange. The shaft is made of stainless steel with two axial and one radial PTFE bearings. The stern tube is made of brass and an...
16.50€ *
Wantenspanner M1,2 x 13/18
Wantenspanner M1,2 x 13/18
Wantenspanner M1,2 x 13/18 Wantenspanner, Spannschloß oder Ösenschraube ..... aus Messing. Mit links/rechts Gewinde verändert sich die Länge des Wantenspanners. So können Wanten, Seile, Taue oder Züge einfach gespannt werden. Lieferumfang 1 Stück Technische Daten: Gewinde M1.2 Länge Mittelteil 11 mm Gesamtlänge min. 13 mm Gesamtlänge...
1.65€ *
Turnbuckle M2 x 22/35
Turnbuckle M2 x 22/35
Shroud turnbuckle M2 x 22/35 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data: Length middle part 18 mm Total length min. 22 mm Total length max. 35 mm Diameter...
1.55€ *
Shroud Turnbuckle M2 x 21/31
Shroud Turnbuckle M2 x 21/31
Shroud turnbuckle M2 x 21/31 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data: Thread M1.6 Length middle part 18 mm Total length min. 21 mm Total length max. 31...
1.65€ *
Shroud Turnbuckle M2 x 21/31
Shroud Turnbuckle M2 x 21/31
Shroud turnbuckle M2 x 21/31 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data: Thread M2 Length middle part 22 mm Total length min. 25 mm Total length max. 39 mm...
1.60€ *
Shroud Turnbuckle M2.5 x 27/43
Shroud Turnbuckle M2.5 x 27/43
Shroud turnbuckle M2.5 x 27/43 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data: Thread M2.5 Length middle part 22 mm Total length min. 27 mm Total length max. 43...
1.60€ *
Shroud Turnbuckle M2.5 x 32/49
Shroud Turnbuckle M2.5 x 32/49
Shroud turnbuckle M2.5 x 32/49 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data: Thread M2.5 Length middle part 28 mm Total length min. 32 mm Total length max. 49...
1.70€ *
Sail kit Prins Willem
Sail kit Prins Willem
Sail kit Prins Willem Ready made sail set for the Sovereign of the Seas kit. Blocks, rings and rigging twine for rigging the sails are neither included in the kit nor in the sail set and must be purchased separately.
49.00€ *
Conversion Kit Billing Boats Mini Series
Conversion Kit Billing Boats Mini Series
Antriebsset für Modelle der Billing Boats Mini Serie . Enthält Welle Ruder und Motor
19.90€ *
Metal Figurines Spanish Navy
Metal Figurines Spanish Navy
Spanish ship's crew Give your model ship of the Spanish Navy even more realism. The set contains 16 metal figures with accessories in 1:84 scale of the Spanish Navy, ready to assemble and paint. Dimensions of the figures: approx. 20 mm. The figure set contains the following figures: 1 captain 4 officers 1 surgeon 2 marines 2...
29.00€ *
Sail Set Hunter Mamoli
Sail Set Hunter Mamoli
Sail Set Hunter Mamoli Finished sail set for the Hunter 1/72nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be easily ironed into shape and also stretched and ironed to the desired size. Strongly diluted black...
31.00€ *
Sail Set Gretel Mamoli
Sail Set Gretel Mamoli
Sail Set Gretel Mamoli Finished sail set for the Gretel1/54nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be easily ironed into shape and also stretched and ironed to the desired size. Strongly diluted black...
27.00€ *
Sail Set America Mamoli
Sail Set America Mamoli
Sail Set America Mamoli Finished sail set for the America 1/64nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be easily ironed into shape and also stretched and ironed to the desired size. Strongly diluted black...
28.50€ *
Sail Set Mary Mamoli
Sail Set Mary Mamoli
Sail Set Mary Mamoli Finished sail set for the Mary 1/54nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be easily ironed into shape and also stretched and ironed to the desired size. Strongly diluted black tea...
21.00€ *
Razer Ten Motor Brushless Motor 3652 4600kV
Razer Ten Motor Brushless Motor 3652 4600kV
The Razerten is a sensorless high-performance motor with enormous power. The dismountable CNC-milled aluminium housing, the finely balanced rotor with precision ball bearings are top-class equipment details. Features: -4-pole rotor design for high torque and fast response. -CNC-milled, high-strength aluminium housing for optimum heat...
39.75€ *
MAX Marine P365 Brushless Motor 550KV
MAX Marine P365 Brushless Motor 550KV
MAX Marine P365 external rotor brushless motor The MAX Marine motor series was specially developed for model ships. With the fan function for additional air cooling, these motors do not require water cooling. Thanks to the mounting frame supplied, the motors can generally be used as an alternative to the MAX Speed 500 to MAX Power 900...
36.90€ *
Rigging Wax
Rigging Wax
Pure solid beeswax for waxing rigging and sailing yarns. Beeswax for waxing rigging yarn and twine. It makes the thread more resistant to abrasion and moisture and easier to thread through small holes. -prevents fraying of the thread -improves gliding properties -smoothes the thread To use, pull the thread or yarn through the wax...
4.90€ *
Outboard Engine Evinrude
Outboard Engine Evinrude
Modern outboard motor for sports boats up to approx. 100 cm in length. Power is transmitted via high-quality metal bevel gears on a 3-blade propeller with a diameter of 42 mm. The outboard motor is supplied without a built-in electric motor. The bevel gears must always be well greased, a grease nipple is already installed on the...
149.00€ *
32 From 43
Viewed